OnePlus 8 and 8 Pro: exciting information about the equipment and the release

Now a whole series of new information about the upcoming OnePlus 8 series has emerged. The equipment of the models and also the release date seem final stand firm.

One seems certain that OnePlus 8 and OnePlus 8 Pro will be launched on April 14th. You have to wait a little longer for the Lite model, it shouldn’t be here until July.

OnePlus 8 Lite specifications

The name OnePlus 8 Lite is still said not to be set in stone. It would also be possible that the device could start under a different name in due course.

It is also interesting that the phone will be equipped with a 90Hz display. A MediaTek SoC is supposed to work inside, here the Dimensitey 1000 is suspected.

The OnePlus 8 Lite is said to have a 6.4 ″ FullHD + AMOLED display and will be delivered with Android 10. The phone will have cables with a fingerprint sensor in the display and a 30T Warp Charge fast charger.

Speaking of charging: the phone is expected to contain a 4,000 mAh battery. On the back, there is a triple camera with 48 MP, 16 MP and 12 MP resolution.

The OnePlus 8 Lite is said to be available in two versions. The cheaper model will have 8 GB RAM and 128 GB storage, the more expensive one will have 8 GB RAM and 256 GB storage.

OnePlus 8 specifications

The OnePlus 8 is said to have installed a 6.5 ″ AMOLED display with 120 Hz. The Qualcomm Snapdragon 865 works inside. There are three variants, 6 GB / 128 GB, 8 GB / 128 GB and 12 GB / 256 GB. In all three cases, it would be LPDDR5 RAM and UFS 3.0 memory.

A triple camera with 48 + 16 + 2 MP should be installed on the back. The battery should have a capacity of 4,000 mAh and can be charged with a 30T warp charge.

OnePlus 8 Pro specifications

The OnePlus 8 Pro is said to have installed a 6.65 ″ AMOLED display with 120 Hz. The Qualcomm Snapdragon 865 also works inside. Dual-mode 5G is also supported. There are three variants, 6 GB / 128 GB, 8 GB / 128 GB and 12 GB / 256 GB. In all three cases, it would be LPDDR5 RAM and UFS 3.0 memory.

On the back of a quad-camera with 48 + 16 + 2 MP + ToF sensor should be installed, on the front a 32 MP selfie camera. The battery should have a capacity of 4,500 mAh and can be charged with 30T Warp Charge. In addition, there should also be 30 watts of wireless charging on board as well as reverse wireless charging.

Leave a Comment